1～11 item / All 11 items
Based on the standard machine, we can manufacture any cleaning machine tailored to your usage.
It is ideal for parts cleaning. It features cleaning power and compactness. Please make use of it at your site.
It is installed within the automatic line, and the transport device automatically loads and unloads the workpieces.
Two types of workpieces are set simultaneously, and the nozzle descends and rotates while performing electron beam pre-degreasing cleaning.
The distance of the nozzle movement can be adjusted. Additionally, since the cleaning time can be changed, it is possible to achieve cleaning that meets needs based on cycle time and cleanliness.
While placing the camshaft on the roller and rotating it, the nozzle on the rail moves back and forth between the left and right ends. Since the camshaft is rotating, there is no cleaning shadow.
The oil hole is being sealed and cleaned.
It is integrated into the factory line and automatically loads and unloads the workpieces. The air blow can rotate the workpieces and perform air blowing without any blind spots.
Clean with a fixed nozzle, and then perform air blowing with nozzle oscillation in the next process.
Inversion, with the lifter transport device moving back and forth, performs workpiece transport using a takt feed. The process involves first cleaning with a fixed nozzle, followed by air blowing.
It is an inline type cleaning machine.
The workpiece is pulled in by lowering it from the horizontal conveyor. Cleaning and air blowing are performed using a fixed nozzle. The size of the workpiece accommodates various types of workpieces.
Using a bucket, 14 types of work are cleaned simultaneously, and then the cleaning solution is rinsed off with warm water.
Equipped with a hot air blow process, it supports pre-cleaning for electron beam welding that meets high quality requirements through complete drying.
Compact cleaning machines installed in large numbers on the vehicle parts assembly line.
The entry and exit points are in the same location, and the precision of car parts has been increasing year by year, with demands for reduced noise and improved durability. This cleaning machine performs the final cleaning before assembly, which affects the precision of the parts.
Swing the nozzle back and forth to aim at the cap mounting hole.
This is a cleaning device designed for cylinder blocks. After cleaning, the workpiece is rotated to drain water and is then transported in the same position.
We will rotate the workpiece and clean the inner diameter, tapped holes, and exterior with air blow.
It is a device for sealing and cleaning oil holes. The two-stage filter system allows for high cleanliness during the cleaning process.
The entire surface can be cleaned uniformly with rotary drive.
This is a cleaning machine for washing plastic containers. The spray and air blow times can be set arbitrarily.
